A partial list and descriptions of relevant project experience of the Pivotal Communications staff.

PROJECT DESCRIPTIONS Cont...

Bandon, Oregon to Fort Jones, California This 284-mile fiber optic cable project provided a portion of the terrestrial connection for TPC-5 between the Bandon, Oregon cable station and the Point Arena station in California. The TPC-5 fiber optic ring provides loop service in the Pacific Ocean connection the United States with Japan. The entire terrestrial connection encompassed approximately 600 miles.

Juneau and Whittier, Alaska; Anchorage to Fairbanks Fiber Optic Cable Project
The purpose of this study was to identify alternative sea cable landing sites at Juneau and Whittier, Alaska and options for connecting fiber optic cable to backbone systems. Backbone connections considered alternative cable routes between Seward and Anchorage, Whittier and Anchorage and the 360-mile segment between Anchorage and Fairbanks.

Thompson Falls, Montana to Port of Piegan, Alberta, Canada Fiber Optic Cable Project
This project provided for the installation of new fiber-optic cable connecting the domestic network with the international network in Canada. Work tasks included the design of 235-miles of fiber-optic cable, environmental field studies and permitting, right-of-way services, construction compliance inspection, and preparation of geo-referenced record drawings. Field design of the planned running line was accomplished using GPS technology. Many sensitive cultural and environmental issues were addressed, due to the project's alignment running through the Black feet Indian Reservation, Glacier National Park, and across the Rocky Mountain Range.

Seward to Anchorage, Alaska Fiber Optic Cable Project
New construction to place direct buried fiber optic cable by railplow techniques required compliance inspection services which were provided for this 120 miles project along the Alaskan Railroad right-of-way between Seward and Anchorage, Alaska. The work included inspection and as-built recording of cable installation, bridge attachments, and track bore crossings. Some redesign work was also provided.

Colvos Passage Submarine Cable Crossing, Vashon Island, Washington
This project provided for the installation of nearly 8,000 feet of sub aqueous cable crossing Colvos Passage in Puget Sound between Vashon Island and Olalla, Washington. This saltwater crossing encroached upon sensitive eel grass beds and other environmentally protected areas in the shallow waters near the edge while channel depths approached 500 feet.

Blaine to Everett, Washington Fiber Optic Cable Project
State Highway 9 was the primary right-of-way used to provide three 2-inch conduits and fiber optic cable to connect the domestic network with international systems in Canada. This 120-mile project included several river crossings in western Washington and an international border crossing at Blaine, Washington. The project required close coordination with State highway officials, local agencies, The International Boundary Commission, and BC Tel for connecting to the Canadian system. Due to restricted physical right-of-way and wetlands much of the construction was by trench and bore methods.

Seattle to Everett to Yakima, Washington Fiber Optic Cable Project
This 190-mile project provided a critical connection to the national backbone system. Right-of-way was secured by the purchase of abandoned railroad right-of-way across the Cascade mountain range and an exchange of properties to access State Parks recreational corridors. State wildlife recreation areas, U.S. Forest Services, State Department of Natural Resource Lands, private property and public roadway right-of-ways were used in the construction of this fiber optic cable facility. Much of the construction was by plowing methods. The work also included several major river crossings, installations in four rock tunnels, one of which was 2 ½ miles long, and considerable rock excavation.



Pivotal Communications © 2009 - All Rights Received.